Polyurethane Foam Spray in Wichita

Renew your roof with polyurethane foam spray in Wichita. With SPF, you can put off replacement of your commercial or industrial roof for years. You get our warranty for 10 years of leak-free service. It is the durable solution for a flat or low slope surface. Call now for a fast, free estimate.


WHY GET YOUR ROOF COATED?
As you think about polyurethane foam spray in Wichita, as opposed to replacement, compare the cost effectiveness.

• Depending on your surface and the condition of the substrate, an average cost of a coating is around $3.00 per square foot. Compare that, for instance, to new metal costing much more. Call now for a specific estimate on spray foam for your building.
• With a new roof, or traditional repair to your current one, you will be paying for tear off and disposal. That alone can add a dollar per square foot.
• SPF are self-flashing, eliminating that extra expense. And eliminating one of the most common sources of leaks – rooftop penetrations.
• The project – start to finish – is much faster than putting on a new system. You save time and money by leaving on the old roof.

YOUR WORK GOES ON WHILE THE COATING GOES ON
When you retrofit with polyurethane foam spray in Wichita, the SPF (spray polyurethane foam) is applied over your existing system, as opposed to tearing it off. The work will not interrupt your daily operations. Your building is never open to the elements, as it can be during replacement. SPF is applied as a single layer, in liquid form. It expands and adheres 100%, covering the entire existing surface. It dries to give you seamless, leak preventing protection that we warranty for 10 years.

WHAT KIND OF SYSTEM DO YOU HAVE NOW?
With polyurethane foam spray in Wichita, your building envelope gets a monolithic, unbroken umbrella.

• It can be applied directly to most systems including asphalt, BUR, concrete, metal and wood. It is applied with an elastomeric top coat (TF Series Acrylic) as protection from UV rays. This also adds energy efficiency. It makes the surface a cool roof that pays for itself in energy savings.
• Foam/gravel restoration will involve removal of loose gravel, application of the foam, and then a layer of crushed rock. An elastomeric coating is applied to penetrations and other areas above the gravel line.
• Because it is so lightweight, the foam can be used to build up areas of a flat roof that are prone to ponding.

GET LONG LASTING SERVICE LIFE
Research has shown that the physical nature of spray foam does not change much with age. This gives it a long life expectancy. It is why we can offer a ten year leak-free warranty. It can last many years beyond that. Applied atop a new roof, studies have shown that SPF has had a service life of 30 years!

If your application sustains damage from wind-borne tree limbs during a storm, small cracks or punctures can be repaired with a sealant. Larger areas can be fixed without a total resurfacing; instead, the affected area can be cut out and additional foam reapplied.

GET SUPERIOR CUSTOMER SERVICE
Your job will be done right the first time, and we are committed to service after the sale. If you talk to our clients they will tell you that unlike some roofing contractors, we are reachable, personable and customer-oriented.


GM Systems offers coatings and metal roof repair in Oklahoma, Texas and Kansas